GV gravure table printing ink

Product Description

GV type of gravure table printing ink is made of high quality raw material, produce after special production process and craft, is mainly used in the pictures of four color dot overprint, with the advantages of bright color, good gloss, frost resistance, water resistance, printing eligibility, good adhesion, Suitable for all kinds of plastic packaging film printing.

Product Feature

1, printing eligibility, able to adapt to all kinds of gravure rotary press a variety of printing speed;

2, print bright color, high concentration of color, excellent printing adaptability;

3，printing ink has good adhesion on the surface of related processing of OPP, BOPP, PE, aluminum plating film and other plastic film.

4, ink film smooth, submissive, rub resistance, adhesion resistance, has excellent storage stability;

5, with a variety of printing ink thinner, can adapt to different 30-200 m/min speed of printing.

Suitable substrate

1, the uniaxial tensile polypropylene film (OPP) : processing degree more than 38 dyne;

2, two-way stretching polypropylene film (BOPP) : processing degree more than 38 dyne.

3, stretch film, polypropylene film (CPP), processing more than 38 dyne.

4, polyethylene (PE) film, processing more than 38 dyne.

5, nylon film (PA) : processing degree more than 52 dyne.

6, polyester film (PET) : processing degree more than 52 dyne.

Other related  film and special base material， please do testing-run first or consult our technical department.

The basic ink

GV gravure table printing ink basically has the 27 varieties for customers to choose to use:

06 varnish    13 light yellow     15 medium yellow    

18 golden yellow    26 deep yellow     27 orange yellow       

28 vermilion     32 bronze red    34 bright red    

37 dark red         39 The original red      44 Don't ooze peach  

47 Don't ooze purple     48 Penetration violet    49 Penetration peach     

51 Noble Blue     53 dark blue       59 bright blue     

61 grass green    62 light green    63 dark green       

79 black       82white    91 silver       

94 lazurite   95 red gold       1533 gold varnish

In addition to the above varieties, can allocate the color ink for the customer.

Retarder thinner

When using the Ink printing, should according to plate depth, climate environment, printing speed, print base such as material factors to comprehensive considerate with the appropriate ink diluent, recommended thinner proportion is:

Printing viscosity

white：Zahn cup 2, 12 to 20 seconds / 25 ℃

Color: zahn cup 2, 18 to 22 seconds / 25 ℃

Note: When the situation is layout too big, machine speed slow, should improve the printing ink viscosity; Thinners must mix then added to ink, otherwise it will cause resin precipitation and scrap in ink.

The instructions and the matters needing attention

1, the ink should be stored indoors to avoid sun exposure, should fully stir before use, make ink uniform inside the barrel.

2, If the printing ink storage environment temperature is low, ink may occur frozen gelatinize, can be normal use after thawing.

3, when dilution ink, you must first mix, slowly add under the conditions of stirring, avoiding adding with quick and large number of.

4, this series of all varieties can be mutual blending into the color according to user's requirements, but can not mix with other different kinds of series ink, thus to avoid system miscibility resin precipitation and cannot be used.

5, the table printing ink is plastic gravure printing ink, not a compound, is only suitable for table printing .

6. this product is not suitable for high-temperature cooking printing and packaging containing fat foods.

7. because of the 48 penetration violet, 49 penetration peach, 51 aristocrat used blue pigment with penetration transference, when print the clothes packaging, it would cause the cloth dirty due to the penetration transference. So it cannot be used for the product have the permeation migration requirements of products, it is recommended to use this no bleeding in the department of product instead.

8, packing specification: the color ink, 18 kg/barrel, white ink, 20 kg/barrel.

9, shelf life: gold, silver for 3 months, the other is 12 months.

10, The recommended data in this technical specification, although the company technical department research and strict determination for many years, in view of the printing base material and the processing technology, it is necessary for customers to test its applicability and test qualified ,then can batch printing.