The new VP700 is a revolutionary concept in inkjet color label printing. At the heart of the printer lies a specially developed inkjet print engine designed by Memjet. This results in incredible troughput speeds (up to 12 inches / 300mm per second!) at impressive print resolutions up to 1600dpi.
Unlike so many other inkjet label printers, the VP700 is the most cost-effective Memjet powered inkjet label printer in it’s class with low ink usage.
• Powerful, state of the art, fully integrated printer management
• One-touch printer maintenance and remote diagnostics
• Integrated statistics and history
• In-built ink monitoring and automatic cost calculation
• Visual job management and stored job recall
• Integrated media management
• Automated paper width detection and image alignment
Technology
Single pass thermal inkjet
Four colors CMYK
Print quality
Black & color, 1600 dpi native resolution
Finishing & accessories
Built in cutter and Auto unwinder and Auto rewinder
Print speed
18m per minute or 9m per minute
Media format
Width: 52 mm to 222 mm
Minimum media length: 52 mm
Thickness: 0,13 - 0,33 mm
Continuous rolls of plain, matt, glossy and super glossy media.
Imaging
Fixed thermal printhead
Five color channels: CMYKK
70,400 nozzles
1,3 pL droplet size
User interface
Intuitive graphical user interface on touchscreen display
Liberty' printer control software
Local language support
|
Media handling Blackmark and gap sensing Media thickness: 0.13 to 0.33 mm Roll-to-cut, roll-to-roll printing Automatic paper width detection Automatic paper position detection |
Ink cartridges
Dye based inks, colors: CMYKK
Cartridge size: 250 ml
Environmental specification
Operating temperature: 15°C to 30°C (59°F to 86°F)
Maximum rate of change: ± 0.5°C/minute (± 0.27°F/minute)
Humidity: 20% to 80% RH non condensing
Atmospheric pressure: 70 kPa to 106 kPa
Controller configuration
Intel® Atom Processor
2GB, DDR3, 1600MHz memory
60GB SATA3 2,5" SSD
Intel® Integrated Graphics
Supported media formats
Native PDF
TiFF, JPEG, EPS, PNG, PS, PRN, PSD, CXF, FS, PD, FPX, PCD, PCT, PICT, WMF, TGA,BMP, PCX
Interface
Remote ethernet access
USB 2.0
Warm-up time
3 To 5 minutes
Power interface
Power supply: 100V to 240V, 50 to 60Hz
Power consumption: 250 to 300W
About Us | Help | Our Services | Security and Privacy | Terms of Use | Declaration | Contact Us
Wap Version
;)